Thread: Jet fitting issues...

Alright so when installing my direct port kit, my buddy accidentally broke the fitting that screws into the nozzle that holds the jet. I bought another jet from Jegs. It screws into the nozzle no problem but the jet will not fit into it.

I can't get a hold of anyone at Zex for a direct replacement. Would I be able to open up the hole a hair bit to squeeze in the jet? I don't think it should be harmful at all but figured i'd ask for some input from the juice heads. TIA!

I don't think it would matter, just keep it as close to the size of the jet as possible.

I'm going to give it a try tomorrow. Its seriously about a hairs-worth thickness that needs to be opened up. Its pretty much the one thing that held me back from picking on hondas tonight.

you probably got an NOS fitting, zex jets are fatter sizes then nos jets

Yeah thats exactly what I ended up getting. I figured they should be the same. I was wrong. I tried getting a fitting from Zex but no luck at all. Couldn't get a hold of anyone on the phone even after a half hour of waiting.

just email zex through the contact us link on thier page and tell them you were short one in a kit you picked up from an Etailer. they will send you one out and you wont have to worry about the size issue