Thread: need some help

I need a cluster wired in my b13. I will pay someone to finish it for me.

wat do you need? gauge cluster?

you mean splicing in the connectors?

Gauge cluster. Me and badhabits727 got most of it figured out. Just the tach does not work now

I've also recently been trying to diagnose a non-working tach for my 92 SE-R and swapping clusters did not fix it. It could be a ground from researching but yet to find that. Also the plastic sheet that passes for a circuit board could be damaged. Last the actual physical tach unit in the cluster can go bad.

This is a good working cluster. He is installing it in his originally tachless ga16 b13. He brought it to me with a hacked up bunch of wires where he tried doing it himself and had the speedo working and the display lights (door ajar etc). I got the temp and gas going for him, but not the tach. The plug for the tach had two extra wires on the original pigtail that his harness did not. I pinned in the wire and tried the blue/white and both blue/black wires from his ecu with no luck. The other missing wire appears to be for cruise control light so not worried about that.