Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: need some help

+ Reply To Thread
Posts: 1-6 of 6
2012-05-28 02:05:09
#1
need some help
I need a cluster wired in my b13. I will pay someone to finish it for me.
2012-05-29 14:38:30
#2
wat do you need? gauge cluster?
2012-05-29 16:12:08
#3
you mean splicing in the connectors?
2012-05-29 19:46:09
#4
Gauge cluster. Me and badhabits727 got most of it figured out. Just the tach does not work now
2012-05-29 20:29:09
#5
I've also recently been trying to diagnose a non-working tach for my 92 SE-R and swapping clusters did not fix it. It could be a ground from researching but yet to find that. Also the plastic sheet that passes for a circuit board could be damaged. Last the actual physical tach unit in the cluster can go bad.
2012-05-29 21:31:53
#6
This is a good working cluster. He is installing it in his originally tachless ga16 b13. He brought it to me with a hacked up bunch of wires where he tried doing it himself and had the speedo working and the display lights (door ajar etc). I got the temp and gas going for him, but not the tach. The plug for the tach had two extra wires on the original pigtail that his harness did not. I pinned in the wire and tried the blue/white and both blue/black wires from his ecu with no luck. The other missing wire appears to be for cruise control light so not worried about that.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top