Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: please help install harness ve b13

+ Reply To Thread
Posts: 1-1 of 1
2010-04-06 03:33:03
#1
please help install harness ve b13
please i need help. i had a ve swapped in my b13.
setup is n60 maf, calum basic, msd 8969, ssac header, 3 inch exhaust.
was running fine, except for once in awhile, after a long hard corner, it would sart bucking and missing, would pull over and idle for awhile, then would go away. thought it was dirty fuel in the tank or the fuel rail or something.
now it is doing it everyday after driving for a while. then now the sarter doesnt turn once in awhile. i will play with the harness where the starter wire goes into, then the starter would crank.
the harness i used in the swap i used was pretty cut up, but the guy who did the swap said he repaired it. then i noticed he bypassed the fan relay,and had my fans running all the time. so something aint right, seeing that he put in a new cts. oh and im running rich, and it takes long to warm up.
i got a hold of another obd1 harness, that is missing a plug or 2.
can someone please help me take the old hacked up one out, and install this better, intact one.
please, i need help. my name is bernard. you can call me at 786-444-4551. im in hollywood florida.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top