Thread: Drive Sloww!!! RIP P11

any updates on what junkyard the car is in?

GLad Your Ok Hate To See P11's Merked Off Like That...

glad your o.k., like they said cars can be replaced, if you want another car i'll sell you my b14 lol

man good u didnt get hurt happy for u life precious when u think it almost over happy for u man

miko is this all u worry about"The tranny is still good in there I bet" u are a selfish piece of sh%t tell the guy are u ok god bless u or something.starbucks put the tranny for bids on the form if the tranny is good or if bad someone can use the internals and people here would give u more cash than this cheap guy this guy i heard he is over price and if he has a chace he would scr$w he would sell the tranny to someone else for alot more u man u are a selfish guy if u need a part he would over price u if he knows u really need it MIKO u are a fake i heard u did this u did that at the track but were are u slips? vids? of the all motor stock block VVL sentra running 13.2 on drag radials ummmmmmm it never happen u go by what other people run lets see some vids i bet guys on here wont say cr$p but thats the only reason i registered because i had enough of your selfishness to the sr20 community making it seem u are the shi%T stop reading and googling other people vids and setups and make a vid of ur crap stop lieing and lets see VIDS wats your comeback i dont need to prove CR%P yea we all know YOUR a fake racer stop over pricing and screwing people i bet u only know how to swap a engine and do minor stuff lets see u tune a car famous miko lets see a vid miko lets see real dyno sheets and not something the dyno can rigs duhhhh who are u kidding till then if i see ur car run with a stock block vvl 13.2 on drags radials then i would respect u now dont say ur car isnt working thats a good excuse hate me please or am i wasting your time "are u going to buy it or waste my time" selfish guy i hope everone here can make a poll to see your car at the track i dont know wats local in florida to u but with some people on here to record that crap run ohhhhh yea in the middle of may i think they are doing a meet at the track y dont u go hide the bottle real good love me sorry for making u upset lol

>>I know somoene who recenlty checked with JUN and it was $2K just to ship
the motor over.<<
Then you better talk to Andreas. He seems to have quite a few of them and has
built a few if I am not mistaken.

http://www.sr20deforum.com/showthread.php?s=&threadid=11750&highlight=SR20VE

OK here it goes people here are the answers to your quetions. The SR16VE VVL
N1 200 HP motor cams will not just bolt into the SR16VE VVL 175 HP or into the
SR20VE VVL 190 HP motors.

The regular SR16VE VVL 175 HP motor at 7,800 RPMs and the SR20 VE VVL 190 HP
at 7,000 RPMs parts and cams are interchangable. The SR16 175 HP motor makes
about 109 hp per Litre and the SR20 190 HP motor makes about 95 HP per litre.
These motors have the same 11-1 compression but remember that the rod ratio,
crank stroke and piston volume are diffrent. The piston size on all the VVL
motors are the same 86mm. If you put the pistons from a SR16VE 175 HP motor in
a SR20VE you will get a compression ratio some where in the low 12- 1 region,
if I am correct did that calculation of the top of my head.

If you get the cams from a SR16VE 175 HP motor and put them in a SR20VE motor
you will get about 218 HP at 7,800 RPMs if you follow the HP per displacement
comparison I gave, and compression, head and intake deisgn are all the same
the only changing factor being displacement. Then this power change should be
about equal and linear which would give the figures I gave.

Remeber people that NA HP is much more smoother, quicker delivered and has a
larger area under the curve when compared to simular turbo equiped motors. I
am not saying they make more HP I am saying that NA motors tend to use their
power band more effectivly. You will find that if you have a turbo motor that
runs 14.0 at say 101 MPH in the 1/4 mile and you find a NA motor that runs
14.0 in the 1/4 the NA motor will have a trap speed of about 98 MPH which is 3
miles slower even though these motors ran the same time. The turbo motor will
start to run away after the 1/4 mile but you can see given a certain distance
the NA motor competes with less Hp. The turbo motor will win the 1/2 mile test
and the top speed test just because it has more HP. Get 2 motors with the same
peak HP NA and Turbo, I will take the NA motor because the NA motor will run
quicker 1/4 mile times and get to the top speed just the same as the turbo
motor will.

I will say with confidence that it is very easy to build a low 13 sec SR20VE
VVL motor. Here ist goes . Cams from a SR16VE VVL 175 HP motor. Have a 4 into
1 header made with runners about 32 inchs long and pipe size of 1 3/4 inchs
going into a 2 1/2 in merge collecter. 2 1/2 inch exhaust. Nice cold induction
with a JWT Comp and a Nismo fuel presure regulater. given what I just listed,
I feel that 235 hp is easly had, Or about 205-210 WHP. Also if you compare
that with say a B18 motor that makes that type of WHP these honda motors will
rum in the 13s also but remember that the VVL motors have a much larger and
stronger HP curve as well as torque curve when compared to the B18 VTEC
motors. I have already done this motor test already with a friend in the
islands who has a Pulsar VVL and he bought the SR20VE VVL motor from me and
put his SR16 cams in the motor and put in the same headers I listed and I made
him a cold induction and a 2 1/2 in exhast and the car is a bullet. The car
runs about 12.8-13.2. He has no 1/4 mile track to run it on but has raced
people with cars that have run simular time and he has run even or beaten
them. His car does come with a quicker ratio box which was equiped that way
from factory given it came with the SR16VE motor.

IF YOU GUYS HAVE ANY MORE QUETIONS I WILL TRY TO ANSWER THEM QUICKLY.

THANKS ANDREAS MIKO.

91 NX2000 with work.
97 Maxima SE, smooth and powerful automatic
http://www.angelfire.com/ny/ianjiggyroom/IansNX2000page.html
DAMN STOP SPEAKING OUT YOU A$$ AND LEARN HOW TO TRIAL AND ERROR BEFORE U SPEAK NOW U SAY THE FIT WITHOUT ANY MODIFICATIONS OR HAVE U BEEN SELLING SR16VE CAMS TO PEOPLE AND NOT THE N1 LETS LET THE PEOPLE SPEAK

Damn Stop Speaking Out You A$$ And Learn How To Trial And Error Before U Speak Now U Say The Fit Without Any Modifications Or Have U Been Selling Sr16ve Cams To People And Not The N1 Lets Let The People Speak

^ wtf???

Hardcore trollin

WTF?????? u know miko huh i see no prob with u lets see what miko has to say. and wat is trollin

Trolling is pretty much a term meaning that you're bashing around on this thread.