Parting out sr20det With Tons of goodies..not selling the car anymore.
Update: Motor is out of the car now pics of all items will be up soon.
sr20det assembled in 2007, installed in 09 and cranked about 3 weeks ago. and has not been driven except to move it in/out of the shop.... it is leaking oil between the head and block in three locations and i don't know why. the motor was put together by a very reputable machine shop in 2007, it sat until i finished school and gathered the $ to have it wired up. the car idles and revs with no hesitation or problems (except for the oil leaks)
-installed in 09 (remember the motor has not been cranked until about 3 weeks ago and was assembled in 2/07)
so here is what i am asking. prices right now are without shipping. if anyone feels that i am asking to much for something or if you have seen an item that i have have sell for much less recently, please PM me with that thread. i want to be as fair as possible. I will start parting out everything listed this weekend 8/8 and 8/9 and will also add pictures.
Sr20det long block with-new oem bearings, valve seals, valve guides piston rings, crank seal and polished crankshaft
-cometic head gasket
-ARP head, main, and exhaust manifold studs.
engine harness (it is cut somewhere)
complete intake manifold without fuel injectors.
$700
-B15 lsd tranny may also sell or include fidanza flywheel. and jgy-customs street-sprung 6puck 390ft/lb of torque clutch.
$800 (tranny only for now).
-New Haltech platinum sport 1000 stand-alone EMS. (these are newer and much more improved over the old E6X units) with harness. (this thing has countless features) Not tuned yet. it is already wired into everything, ie: injectors, starter distributor etc.. i can also let this go with the hks injectors and discount them together. (pm me)
$1150
-HKS side feed 555cc injectors 0 miles on them.
$450
-fuel rail (powder coated blue) with HKS FPR regulator adapter ($70 new)
$120
-Aeromotive A1000-6 FPR with gauge.
$120
-Crane Hi-6 ignition with crane external coil
$150
-highport 02 induction intake manifold The last design; with thermoblock spacers, micro-polished and bored throttle body and external IACV
$650
-turbonetics T3/T04E non ball bearing .63 turbine housing .50 compressor.
in like new condition No shaft play. maybe about 1K miles on it. Was on my old sr20de+t set up.
$450
-Tial 38mm external wastegate. polished.
$140
-protech's first stainless steel log manifold, sort of a custom order.
$350
-stainless steel and coated j-tube and downpipe 3inch.
$500
-S4 cams. (mint condition, purchased used here on the forum but never got the opportunity to run them.
$400
-UR polished pulleys, crank power steering and alternator. I rather not seperate these.
$160
-HKS ssqv blow off valve with recirculating insert.
$100
-Chrome dipped, not polished valve cover.
$100
-Meziere electric water pump. with block off plate (about 500 miles on it)
$250
-ebay fmic I don't have exact measurements but it is 2.5inches thick. (this is not some cheap unit).
$100
I will also be parting out 2.5inch intercooler piping.
In the near future all gauges will be for sale and include, hks oil pressure /temp and boost gauge . they are all 60mm and mechanical.
the greddy egt gauge is 52mm.
Very first start up on the haltech, with stinky old gas, No tune and uber rich, no downpipe.
some old pictures pre sr20det and some with my old setup, an sr20de+T
sr20det assembled in 2007, installed in 09 and cranked about 3 weeks ago. and has not been driven except to move it in/out of the shop.... it is leaking oil between the head and block in three locations and i don't know why. the motor was put together by a very reputable machine shop in 2007, it sat until i finished school and gathered the $ to have it wired up. the car idles and revs with no hesitation or problems (except for the oil leaks)
-installed in 09 (remember the motor has not been cranked until about 3 weeks ago and was assembled in 2/07)
so here is what i am asking. prices right now are without shipping. if anyone feels that i am asking to much for something or if you have seen an item that i have have sell for much less recently, please PM me with that thread. i want to be as fair as possible. I will start parting out everything listed this weekend 8/8 and 8/9 and will also add pictures.
Sr20det long block with-new oem bearings, valve seals, valve guides piston rings, crank seal and polished crankshaft
-cometic head gasket
-ARP head, main, and exhaust manifold studs.
engine harness (it is cut somewhere)
complete intake manifold without fuel injectors.
$700
-B15 lsd tranny may also sell or include fidanza flywheel. and jgy-customs street-sprung 6puck 390ft/lb of torque clutch.
$800 (tranny only for now).
-New Haltech platinum sport 1000 stand-alone EMS. (these are newer and much more improved over the old E6X units) with harness. (this thing has countless features) Not tuned yet. it is already wired into everything, ie: injectors, starter distributor etc.. i can also let this go with the hks injectors and discount them together. (pm me)
$1150
-HKS side feed 555cc injectors 0 miles on them.
$450
-fuel rail (powder coated blue) with HKS FPR regulator adapter ($70 new)
$120
-Aeromotive A1000-6 FPR with gauge.
$120
-Crane Hi-6 ignition with crane external coil
$150
-highport 02 induction intake manifold The last design; with thermoblock spacers, micro-polished and bored throttle body and external IACV
$650
-turbonetics T3/T04E non ball bearing .63 turbine housing .50 compressor.
in like new condition No shaft play. maybe about 1K miles on it. Was on my old sr20de+t set up.
$450
-Tial 38mm external wastegate. polished.
$140
-protech's first stainless steel log manifold, sort of a custom order.
$350
-stainless steel and coated j-tube and downpipe 3inch.
$500
-S4 cams. (mint condition, purchased used here on the forum but never got the opportunity to run them.
$400
-UR polished pulleys, crank power steering and alternator. I rather not seperate these.
$160
-HKS ssqv blow off valve with recirculating insert.
$100
-Chrome dipped, not polished valve cover.
$100
-Meziere electric water pump. with block off plate (about 500 miles on it)
$250
-ebay fmic I don't have exact measurements but it is 2.5inches thick. (this is not some cheap unit).
$100
I will also be parting out 2.5inch intercooler piping.
In the near future all gauges will be for sale and include, hks oil pressure /temp and boost gauge . they are all 60mm and mechanical.
the greddy egt gauge is 52mm.
Very first start up on the haltech, with stinky old gas, No tune and uber rich, no downpipe.
some old pictures pre sr20det and some with my old setup, an sr20de+T
Be the first to like this post.
Back to top
