'96 Pacific Blue 200sx SE-R
Hey guys, I'm posting this up for a friend. He's going to be getting a new car pretty soon and needs to get rid of this. The car has some problems but he's slowly getting it back up to shape. The car is painted Pacific Blue (BR2). It was originally Super Black (KH3). The hood and bumper are painted Platinum Gold.
$4500 OBO
The good stuff:
• Tein Super Street Coilovers with -2.13 to -3.62 Adjustable ride height in the Front and -0.63 to -2.95 in the Rear. Has 16 levels of dampening or 32 levels of dampening with the EDFC kit
• Tein Front Pillow Ball Upper Mounts w/ Adjustable Camber
• Tein Rear Pillow Ball Upper Mounts
• JWT P.O.P. Intake
• NX2000 AD22VF brakes.
• NX2000 Wheels with 195/60/14 Falken Azenis RT-615's
• JDM SR20DE Motor with approx 70k miles. (Old engine blew due to previous owner screwing him over)
• JWT Solid Engine Mounts (on all 4 mounts)
• ACT Street Disc and PP about 6k miles on the PP and about 4k miles on the disc
• Battery relocated to trunk
• MAF reground
• Pacesetter header with "2.25 cat back exhaust and stock muffler welded on
• MSD 6A Ignition Control
• A/F Ratio, Boost, and Water Temp Autometer white faced gauges in a Lo-Tek A-pillar 3 gauge pod
• MOMO steering wheel
• ORIGINAL and RARE Nis-Knack Projector Headlights and Chrome Grill. Clear Corner lights.
• Has a '98-99 SE-R/SE-L style front bumper
• New Heater Core (PITA job to do!!!)
• New Thermostat
• New Knock Sensor
• New OEM Clutch Cable
• New Interior Carpet.
• New Starter
• Alternator has been replaced for a great condition one.
The Bad Stuff
• 5th gear Pop Out (will install another 5 speed LSD tranny with no pop out if sold for $150 more)
• Cracked Windshield (Does not leak))
SMALL VIDEO
PICTURES!!!
Tein SS Because lowering springs are for n00bs!
After the suspension was installed Cell phone pics
$4500 OBO
The good stuff:
• Tein Super Street Coilovers with -2.13 to -3.62 Adjustable ride height in the Front and -0.63 to -2.95 in the Rear. Has 16 levels of dampening or 32 levels of dampening with the EDFC kit
• Tein Front Pillow Ball Upper Mounts w/ Adjustable Camber
• Tein Rear Pillow Ball Upper Mounts
• JWT P.O.P. Intake
• NX2000 AD22VF brakes.
• NX2000 Wheels with 195/60/14 Falken Azenis RT-615's
• JDM SR20DE Motor with approx 70k miles. (Old engine blew due to previous owner screwing him over)
• JWT Solid Engine Mounts (on all 4 mounts)
• ACT Street Disc and PP about 6k miles on the PP and about 4k miles on the disc
• Battery relocated to trunk
• MAF reground
• Pacesetter header with "2.25 cat back exhaust and stock muffler welded on
• MSD 6A Ignition Control
• A/F Ratio, Boost, and Water Temp Autometer white faced gauges in a Lo-Tek A-pillar 3 gauge pod
• MOMO steering wheel
• ORIGINAL and RARE Nis-Knack Projector Headlights and Chrome Grill. Clear Corner lights.
• Has a '98-99 SE-R/SE-L style front bumper
• New Heater Core (PITA job to do!!!)
• New Thermostat
• New Knock Sensor
• New OEM Clutch Cable
• New Interior Carpet.
• New Starter
• Alternator has been replaced for a great condition one.
The Bad Stuff
• 5th gear Pop Out (will install another 5 speed LSD tranny with no pop out if sold for $150 more)
• Cracked Windshield (Does not leak))
SMALL VIDEO
PICTURES!!!
Tein SS Because lowering springs are for n00bs!
After the suspension was installed Cell phone pics