can anyone verify that this will work with a b14 basic board? If not I will be able to next week when my consult cable arrives.
and just a side note, when doing this I was getting funky code when adding the XDF paramater from TunerPro. Here is a sample of the funky looking code.
All of my XDF's that I modified from TunerPro do this.
To get around this I just took a untouched XDF and manually added the Consult table as well as adjusted the RPM paramaters for the fuel and timing maps. Although its not reccomened to modify the XDF manually, this is how I will be doing it for now.
--------------------------------------------------------------
Well I finally got my consult plug to work (complications due to auto to manual swap) and this method works great to log TP with a basic board.
and just a side note, when doing this I was getting funky code when adding the XDF paramater from TunerPro. Here is a sample of the funky looking code.
0x1
1.0
Z32
XDF for 1996-1997 B14 with 7780 MCU
CREDITS:
Mark Mansur for providing TunerPro!!
This XDF is provided without support, use at your own risk.
Calum Johnson
0
EFF1 - ROM Label
Table values in ASCII
5
1000.000000
4
0
0
All of my XDF's that I modified from TunerPro do this.
To get around this I just took a untouched XDF and manually added the Consult table as well as adjusted the RPM paramaters for the fuel and timing maps. Although its not reccomened to modify the XDF manually, this is how I will be doing it for now.
--------------------------------------------------------------
Well I finally got my consult plug to work (complications due to auto to manual swap) and this method works great to log TP with a basic board.
Last edited by D-Unit121
on 2013-11-14
at 18-14-58.
Be the first to like this post.
Back to top
