Thread: KABOOM! Bearing blew to bits

+ Reply To Thread

First

Last

Posts: 21-30 of 34

Search Thread

2015-07-05 23:46:54

#21

NissanEgg

1994.5 LE-R

Join Date: 2011-08-25
Location: Auburn, AL
Posts: 630
Trader Score: 0 (0%)

No your definitions are wrong.
Bearing is bearing.
Hub has the wheel studs on it.
Spindle is the cast iron part that the bearing presses into and the strut and tie rod attaches to.

0 Likes

Be the first to like this post.

Reply Reply With Quote

2015-07-05 23:48:58

#22

NissanEgg

1994.5 LE-R

Join Date: 2011-08-25
Location: Auburn, AL
Posts: 630
Trader Score: 0 (0%)

Sounds like hub is bad or was assembled wrong. Pics help greatly

0 Likes

Be the first to like this post.

Reply Reply With Quote

2015-07-06 12:01:30

#23

Kyle

OEM Plus.

Join Date: 2007-12-11
Location:
Posts: 11,903
Trader Score: 52 (100%)

Were the c clips re installed to keep the bearing in its spot?

0 Likes

Be the first to like this post.

Datsun/Nissan Racing -- 1977 to 1985 Richard's SCCA/IMSA 510 and 200SX competition days!
....95 FN4 200SX SE-R, 93.5 AL0 G20, 92 AH3 Sentra SE-R, 95 DJ2 G20, 96 CG2 G20 06 CTS-V
Save the 54C, GTi-R, Pulsar RNN-14 Parts! Click here!

Reply Reply With Quote

2015-07-06 14:50:41

#24

canx2k

I have an inventory!

Join Date: 2008-10-02
Location:
Posts: 3,342
Trader Score: 22 (100%)

Alright, so I need a new hub then - because the bearing was installed by a machine shop, so I assume that work is all ok. The parts guy at Nissan said that the part numbers are not the same for the 92 2.0 and the 92 1.6, so I'm...kind of concerned about ordering the wrong part. Their cost on the hub? $202 freaking dollars.

Last edited by canx2k on 2015-07-06 at 15-00-30.

0 Likes

Be the first to like this post.

Reply Reply With Quote

2015-07-20 01:22:52

#25

boostednx

additcted to boost

Join Date: 2007-12-16
Location: the river
Posts: 1,430
Trader Score: 3 (100%)

This sounds a little crazy to me that you cant find a hub for cheaper than $200.also wheel bearings are a weird this because they are a 3 part bearing so that being said they are sealed because they do not require you to lube or grease them but they are not sealed because they are 3 pieces.It is possible that you could find a new hub somewhere else like one for a 200sx they are around $80 brand new on rock auto if i remember correctly .

0 Likes

Be the first to like this post.

SR20DEEP,MARSH TUNING
94 Se-r vq35 daily
94 ser 67mm turbo car

Reply Reply With Quote

2015-07-20 01:43:27

#26

canx2k

I have an inventory!

Join Date: 2008-10-02
Location:
Posts: 3,342
Trader Score: 22 (100%)

This is part of the reason I'm doing the 6 speed swap, can get the SPEC v newer hubs and spindles.

0 Likes

Be the first to like this post.

Reply Reply With Quote

2015-07-20 01:48:57

#27

canx2k

I have an inventory!

Join Date: 2008-10-02
Location:
Posts: 3,342
Trader Score: 22 (100%)

Oh shit wait a sec maybe I'm thinking about this backwards. Now that I really think about it...
If I get the SPEC v spindles and hubs and axles....the spindle and hub bolts on, but I gotta change the rear too, but the nx rear calipers are not upgraded, just simply changed to 4x114...kawt damn then I gotta change the rims too. Arg.

Last edited by canx2k on 2015-07-20 at 01-50-58.

0 Likes

Be the first to like this post.

Reply Reply With Quote

2015-07-20 01:58:02

#28

boostednx

additcted to boost

Join Date: 2007-12-16
Location: the river
Posts: 1,430
Trader Score: 3 (100%)

an $80 hub to me makes way more sense than a $2500 6 speed swap

0 Likes

Be the first to like this post.

SR20DEEP,MARSH TUNING
94 Se-r vq35 daily
94 ser 67mm turbo car

Reply Reply With Quote

2015-07-21 17:46:54

#29

canx2k

I have an inventory!

Join Date: 2008-10-02
Location:
Posts: 3,342
Trader Score: 22 (100%)

I'd really like to know if the b14 hub presses into the b13 spindle, but do you think I could find anything? There's almost no documentation on it. There is however a 98 sentra in my scrap yard, if it has front stuff on it, maybe I can get the hub cheap and bust out the caliper to verify. For heaven's sake, $200 per is stupid, but $70 is much more bearable.

0 Likes

Be the first to like this post.

Reply Reply With Quote

2015-07-22 15:10:48

#30

squirlz

MoreNuttyThanASquirlTurd

Join Date: 2007-12-16
Location: Madison, WI
Posts: 3,045
Trader Score: 48 (100%)

I got a new hub at Advanced Auto when it ate one of my bearings, everything has been fine since.

0 Likes

Be the first to like this post.

92 Infiniti G21 - 242 WHP & 182 Ft-LBs (Mustang Dyno) - NA 88mm 12.5:1 VE, N1 cams, Xcessive Intake, Q45 TB, Mazworx Header, 3" Exhaust, Nismotronic ECU on MAP and IAT.
View The Build Here

Reply Reply With Quote

First

Last

+ Reply To Thread

Thread Information

There are currently ? users browsing this thread. (? members & ? guests)
StubUserName