So for those of you who have done this, which pedal assembly is the easiest to use? Tried searching everything i come up is here say, would like to do it with out hacking up anything, is anything a bolt in?
I used a 94 Altima clutch pedal and cylinder with steal braided hydro clutch line. I'm running a 6spd so the rest is all swap parts. The Altima pedal and cyl bolted right ito my b13 I only had to make the third upper bolt hole larger.
Depends on B13 or B14. On my B14, I'm using a Maxima pedal and master cylinder with the reservoir from a b15. The top bolt on the pedal does not line up so you have a make a bracket. The B13 seems to have more room for the full Maxima or Altima setup.
I used a 95 Maxima pedal and master cylinder on my B13 but the pedal sits too high. I don't want to grind off my B13 spacers since I noticed the Maxima also had them.
Does the Altima pedal sit at the right height without removing the spacers?