Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: SR Flywheels

+ Reply To Thread
Posts: 181-186 of 186
2014-08-19 16:36:00
#181
And there's this @ ~$120....

http://www.amazon.com/Clutch-Master-H3-16-Flywheel-Insert/dp/B00CHNOP9A

2014-08-19 16:47:41
#182
Originally Posted by 1fastser
I'm trying to identify an aluminum flywheel I purchased many, many moons ago...back when there were few people making parts for the B13 SER. It has an 8-bolt steel insert that I would like to replace but the flywheel has absolutely NO markings to identify its maker. I don't recall ever putting a sticker on anything but my tool box but there is a Clutch Masters sticker on the flywheel. However, CM, Fidanza, & ACT have all denied it's theirs. The Stillen flywheel on the 1st page, looks the most similar imo...and the insert could be drilled to match the pattern in the pic (if it was available). My next step will be to remove the insert to see if there are any identifying markings underneath.

This was being used on my '91 SER. It has 108 teeth and caused no CEL.

On to the pics...





Came accross this thread and they seem to be in the same boat, un-sure of brand. Looks exactly the same. Dave

9.5lb Flywheel (108 teeth) - SR20 Forum
2014-08-19 18:37:05
#183
Originally Posted by DaveM
Came accross this thread and they seem to be in the same boat, un-sure of brand. Looks exactly the same. Dave

9.5lb Flywheel (108 teeth) - SR20 Forum


That thing sold for dirt cheap too!!! Well, that aint happening here!
2015-01-15 23:53:11
#184
well pies on my face. called back to competition clutch. spoke to a nice gentleman who walked back counted the stock of flywheel and said 108. so i recounted and got 108, friend recounted 108, another friend 108... so my idiot ass realized the cps hit the flywheel and broke. damn.

so to recount the competiition clutch flywheel i got for 247 shipped is 108 tooth and will be reinstalled in the next day or two.
Last edited by skeeter149 on 2015-01-22 at 17-57-20.
2015-01-16 00:30:43
#185
and i see xtd has changed the listings to 13lbs.

just got this reply from aimco on ebay about the xtd 108 tooth flywheel

Dear skeeter149,

hello.
actually,this is 109 flywheel but this flywheel designed for 108 and 109 both ring gear flywheel.
thanks
jim

- aimcoclutch
Last edited by skeeter149 on 2015-01-16 at 05-21-00.
2015-01-20 01:26:27
#186
I bought the xtd one years ago for like 75 brand new which was a sweet deal for a 13 pounder considering its 40ish around here just to get a fresh surface cut
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top