Thread: M & h 235/60/15

Anybody have any experience with the M&H 235/60/15 street/ strip tire on a b13/14? Thinking about pulling the trigger on them. Want to see if anyone has fitted them up to the mentioned chassis's with out modifications.

Tire will be too tall it is 26.1" in diameter. I have seen a b13 on 26" tall slicks but that was a drag car

this can def. work! I know someone who has ran this on a b14 rim on their b13 with no problems. obviously you will have to raise the car and I suggest you only run these tires if you have coilovers......strut and spring combo will not clear. I have an exact set of these tires going on my car this saturday

post pics of setup or it didn't happen 200sx Se!

Looks like a perfect fit!

Looks great C.J Any rubs or spacers?

I'm running no spacers. Had a very minor rub issues on the outer portion of the drivers side fender, but that's cause I had the coils low from my previous lower profile tile. Raise it up a hair and it all good. This wasn't a 100% work free drop in. I removed wheel well plastic, and had to "massage" the body in 2 spots as the tire would slightly rub on the inside, on each side, once you did a full turn of the steering wheel. These tires will not work unless your on full coilovers

- - - Updated - - -
@Dave_SR20

Good to know. thanks dude

Thank 200sx Se, I guess you do learn something new everyday