Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Best 60' time on 15" slicks.

+ Reply To Thread
Posts: 11-16 of 16
2014-12-24 21:45:14
#11
Hydraulic staging ebrake setup ftw.
Every track is prepped differently so 60ft times will always vary. I'm still at the 1.9 mark but a good hook will probably equal to some broken parts lol.

Originally Posted by Topdog781
Originally Posted by OptimumSE-R
My 60' on a 15" wheel with 22s with a bolt on VE was a low 1.9.


That is pretty much what I'm running now, but I have not been able to get a decent burn out in either. The Ebrake cables are crap.
Last edited by Kleensleeper on 2015-01-09 at 23-07-46.
2015-01-04 18:52:11
#12
yes car had traction bars
2015-01-07 20:34:39
#13
1.74 60' on 22X8X15's mh's, DET 2871r around 350hp, Tein SS Coilovers, no traction bars, 6k rpm launch
2015-01-20 20:02:37
#14
Wow really..... I am below stadards that's what I thought.... just out of curiosity, was anyone using launch control?
2015-01-20 22:25:43
#15
On a 23" slick I cut a 1.78 short time. This was launching at 6500 RPM on the 2 step building about 6 psi. No launch control but, a decent boost ramp.
2015-03-25 13:04:54
#16
I will be hitting the track this year with 22x8x15 M/H slicks and my launch control had been previously set for about 4500 for street tires. I notice you guys are launching much higher at 6k, are you experiencing a lot of wheel spin and have you experienced bogging at a lower launch?
+ Reply To Thread
Quick Reply
Thread Information
There are currently ? users browsing this thread. (? members & ? guests)
StubUserName

Back to top