Thread: took it to sunshine

i woulda bought your kit..haha

went out to the strip last night. once again, no one was allowed around the water box. so traction sucked

went to sunshine again tonight. did a lil better this time on all motor.

rt-.438
60'-2.322
330-6.630
1/8-10.341

Big improvement on the 60ft. Get it down to 2.1-2.2 low ten-high nine. Man lmk when you want to tune it, makes a good difference.

i wanna break into 9's soon on an n/a ga16de. and i am looking to tune it soon. i ordered an nx1600 ecu to swap into my b13 and see what it does.

That does nothing really.

Need to get a SR ecu, chip, and tune. Or SR ecu, sr injector, sr maf. All you need. Control vtc with an MSD8969. You can really tell when vtc is on or off on the graphs.

i have an sr ecu, maf and injector laying around... what would be the best way to chip and tune it? and what rpm range would you set the vtc, because i have an msd digital window switch laying around also.

Gio did my Ga16DE. Netted a solid 10whp gain, so you'd have to ask him. I have some info on ga16forum.com

how much do you think a header would help? because in running a stock exhaust mani

Quite a bit. I have a qg18de header, real nice piece made an improvement over the aftermarket ga header.