Thread: The Great Quarter Mile Thread. (1/4 Mile Thread for Fast Cars and Drivers)

Pitos and Bes numbers need to be updated.

Not really a huge accomplishment but my first addition to a quarter mile thread.

Sr20VE- BONE STOCK HEAD TO TOE.
All-motor- No boost no spray.
Untuned-Nistune -small mods to fuel map
Boltons- Header-intake-pulley
weight reduction- gutted but not cut. All factory metal intact.
Slicks- M/T

91 ser with a fresh completely stock jdm sr20de

Protec log manifold
Turbonetics T3 super 60 turbo
Tial 40mm wastegate greddy type s bov
2.5 inch exhaust side to 3" open downpipe
Jwt ecu nismo 740cc z32 maf
23x8x13 m&h race master full slicks with b14 wheels on the back
Passenger and rear seats removed before taking this pass.
car made 323whp@14psi adjusting timing and fuel pressure.

11.69@123mph

RR DE 11.3cr
catcams 298/288
16VE pistons
Fuji header
2.25" cat back
NISTUNE
VLSD

Full weight reduction
Road legal semi slicks

13.83@101.75mph

^Good MPH for your setup. If you get your 60' down to 1.8 you should be around 13.10

@4dr_xe Now that's well applied power. I loved my 60-1

Have you had this car dynoed? Approximately how much power have you made?

Damn that 60'! My 13.7 @ 103, 2.3 60ft would be 12's with a better 60! Spring is coming....

Or slicks! 😁 I see Ashton on page 1 with a similar setup but a 1.8 60ft for 12.44 ET...and slicks. I want 12's on street tires! @ashtonsser what cams?

That setup was with jdm de, t25, 8psi of boost, jwt s4's, pullies, flywheel, open greddy downpipe, fmic, stock ecu with an safc when I went 13.0@110 on street tires and then went 12.4@110 on slicks with the same setup no changes other than slicks.

My VE-T setup went 11.9@131.3 mph on street tires and by street tires I mean my every day 205/50/15 Hankook Ventus HRII's, lol. Peddling all the way down the track. That was with the 2.2L 12.5:1 motor and a 6262 on stock ve cams, 7500 rpm rev limiter shifting to 5th and still spinning 5th.

It was a waste of time going on street tires but I figured what the hell.