Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: The Great Quarter Mile Thread. (1/4 Mile Thread for Fast Cars and Drivers)

+ Reply To Thread
Posts: 111-120 of 203
2013-10-24 21:41:20
#111
Pitos and Bes numbers need to be updated.
2013-10-27 03:34:27
#112
Not really a huge accomplishment but my first addition to a quarter mile thread.

Sr20VE- BONE STOCK HEAD TO TOE.
All-motor- No boost no spray.
Untuned-Nistune -small mods to fuel map
Boltons- Header-intake-pulley
weight reduction- gutted but not cut. All factory metal intact.
Slicks- M/T

Last edited by Topdog781 on 2013-11-01 at 02-14-15.
2013-11-27 02:44:29
#113
91 ser with a fresh completely stock jdm sr20de

Protec log manifold
Turbonetics T3 super 60 turbo
Tial 40mm wastegate greddy type s bov
2.5 inch exhaust side to 3" open downpipe
Jwt ecu nismo 740cc z32 maf
23x8x13 m&h race master full slicks with b14 wheels on the back
Passenger and rear seats removed before taking this pass.
car made 323whp@14psi adjusting timing and fuel pressure.

11.69@123mph

2013-11-27 21:52:18
#114


RR DE 11.3cr
catcams 298/288
16VE pistons
Fuji header
2.25" cat back
NISTUNE
VLSD

Full weight reduction
Road legal semi slicks

13.83@101.75mph
Last edited by rowdy-gti on 2013-12-22 at 16-56-16.
2013-11-27 21:56:59
#115
^Good MPH for your setup. If you get your 60' down to 1.8 you should be around 13.10
2013-11-27 21:58:39
#116
@4dr_xe Now that's well applied power. I loved my 60-1
2014-01-12 19:10:51
#117
Originally Posted by rowdy-gti

RR DE 11.3cr
catcams 298/288
16VE pistons
Fuji header
2.25" cat back
NISTUNE
VLSD
Full weight reduction
Road legal semi slicks
13.83@101.75mph



Have you had this car dynoed? Approximately how much power have you made?
2014-01-20 18:01:39
#118
Damn that 60'! My 13.7 @ 103, 2.3 60ft would be 12's with a better 60! Spring is coming....
2014-01-20 18:08:05
#119
Or slicks! 😁 I see Ashton on page 1 with a similar setup but a 1.8 60ft for 12.44 ET...and slicks. I want 12's on street tires! @ashtonsser what cams?
2014-01-20 21:28:01
#120
That setup was with jdm de, t25, 8psi of boost, jwt s4's, pullies, flywheel, open greddy downpipe, fmic, stock ecu with an safc when I went 13.0@110 on street tires and then went 12.4@110 on slicks with the same setup no changes other than slicks.

My VE-T setup went 11.9@131.3 mph on street tires and by street tires I mean my every day 205/50/15 Hankook Ventus HRII's, lol. Peddling all the way down the track. That was with the 2.2L 12.5:1 motor and a 6262 on stock ve cams, 7500 rpm rev limiter shifting to 5th and still spinning 5th.

It was a waste of time going on street tires but I figured what the hell.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top