Thread: Video 15.2 w/ a VE in a b13 N1 cams

i havent dynoed it yet, i am waiting for a different maf and something to tune it with before i do that. but the car runs really good though, but the track might have been a little bit of the problem because i was keeping up with a z06 vette.

O.0 that track is garbage then!

i ran on a test and tune night and they dont put down the traction compound on those nights, so i don't if that was part of the problem or what the deal was.

88mph? Thats stock sr20de trap speed... somthings up there

when i had my stock cams in it i ran a 15.4 at 94 mph.

Might be throwing a Knock sensor code in his ECU.

yeah thats not good at all man, something is definetly up, a stock ve with even stock exhaust in a b13 can easily run mid 14's on street tires let alone slicks. Yous should be well into the 13's on slicks with the stuff done to yours. Something definetly isnt right, even if track conditions were horrible it didnt look like you were spinning or anything like that that would cause a slow time, your 88mph trap speed is another give away to a problem,

My old se-r with a fully bolted on de with S3 cams trapped 97mph and ran 14.2 on street tires on a crappy track. I mean you can go look at what others with ve's with your mods are running, most on slicks are in the 13's I would definelty look into it

Also what pressure did you have in your slicks? If your have them over deflated then it can really hurt trap speeds!

i had them at 12 psi

Thats very low

Try a run at 20psi next time, and let them down 2psi each run then cross reference times for good 60 ftr v's trap speed.