UMS Tuning- Tony Szirka
Hey guys, I know Tony at UMS isn't on here but I just wanted to give props to him and the guys at UMS.
UMS is a Tuning/Fabrication shop in Phoenix, AZ. j0n (aka Cavern) has a lot of experience with him but I'd like to share my experiecne.
With our upcoming trip accross the states from San Jose, Ca to Tupelo, MS, we wanted to make the most out of the trip so we called a couple people up and decided we wanted to get the VE tuned at UMS Tuning as recomended by j0n. We got into AZ with an appointment for 1 o'clock PM with the anticipation of a quick and easy tune. After getting setup and what not, we discovered we had a few issues to work out before we could get the most out of our tune/time so our "in 'n out" tune was out of the question (3 hours later). Tony being the nice/understanding guy he is, he recommended we get the issues worked out then come back the next shop day. As frustrating as it was for both of us(more so for him I would imagine) we was VERY understanding and worked with us.
After getting the issues resolved, we came back, and jumped on the dynapack again. Tony got to work with messing with timing and fuel and what not. Took him JUST under 2 hours from start to finish mind you with software he was unfamiliar with at the time( Nistune ).
Overall I/we are VERY satidfied with Tony's work and will recommend it to anyone that is looking for a good tuner that knows Calum/Nistune/SR20's/CARS in general. Just google UMS Tuning.
btw, we got 195 WHP/148 TQE Dynapack
Thanks Tony
UMS is a Tuning/Fabrication shop in Phoenix, AZ. j0n (aka Cavern) has a lot of experience with him but I'd like to share my experiecne.
With our upcoming trip accross the states from San Jose, Ca to Tupelo, MS, we wanted to make the most out of the trip so we called a couple people up and decided we wanted to get the VE tuned at UMS Tuning as recomended by j0n. We got into AZ with an appointment for 1 o'clock PM with the anticipation of a quick and easy tune. After getting setup and what not, we discovered we had a few issues to work out before we could get the most out of our tune/time so our "in 'n out" tune was out of the question (3 hours later). Tony being the nice/understanding guy he is, he recommended we get the issues worked out then come back the next shop day. As frustrating as it was for both of us(more so for him I would imagine) we was VERY understanding and worked with us.
After getting the issues resolved, we came back, and jumped on the dynapack again. Tony got to work with messing with timing and fuel and what not. Took him JUST under 2 hours from start to finish mind you with software he was unfamiliar with at the time( Nistune ).
Overall I/we are VERY satidfied with Tony's work and will recommend it to anyone that is looking for a good tuner that knows Calum/Nistune/SR20's/CARS in general. Just google UMS Tuning.
btw, we got 195 WHP/148 TQE Dynapack
Thanks Tony
Be the first to like this post.
Back to top
