Thread: Ecu ?

Calum been trying to get a hold of you for some time now, but anyway got a couple ecu question for you. I have a stock 95 B14 with a stock DET swap. I am using a stock 96 G20 auto ECU with a safc2 for tuning and a stock DE MAF.

1. Can you deleted the auto trans cel that i get from the ecu?
2. Can you program the ecu for my stock DET, using the stock DE MAF?
3. Not sure if it can be programed realtime?

Thank for your time

1 - No. Use a manual core. The B14 actually has two processors in it, one for running the engine that is very similar to the B13, and one for running the OBD-II stuff. I reprogram the engine processor, so the OBD-II side will still throw a CEL for the tranny.

2 - Yes.

3 - Yes, Realtime or Basic.

Would it be better to get a stock SE-R ecu for you do reprogram or is the g20 ecu fine?

It doesn't matter.

Calum is there any difference between 95 SER MT ECU and a 98 MT ECU?

Yes! Lots! 95=good, 98=bad. 95-97 only!

Sorry Calum, 1 more question. I got a spare 98 SER ecu, your saying it cannot work? with my DET seup?

Correct. 98 bad, 95-97 good.