Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Calum can I just order a chip?

+ Reply To Thread
Posts: 1-10 of 10
2009-02-03 04:39:03
#1
Calum can I just order a chip?
Ive already got the ECU socketed for a basic program running a 50lb setup. I wanna run a 750cc setupo now. Can you just send me the chip? Also is it easy to replace them?

I need:

Z32 Maf
750cc Inj
No rev limit
8.5 DET program
2009-02-03 05:02:16
#2
its very easy to replace them, pop the top, chips have a groove on them that goes one way just pop the lever and pull the old ones out and replace them with these.

I have a set of 740cc injectors, z32 maf, but with rev limiter, and you might want to reconsider no rev limiter, its very bad idea because one mis shift is all it takes and the motor is gone, Unless your using an msd box for the rev limiter. If so then all is well.

But if you want them i can send them to you Calum charges like $5 for the set plus the shipping cost. Let me know cuz i think calum is out of town till sunday when i tried to call him.

My chips should work pretty good with your setup as well.
2009-02-03 14:42:24
#3
I need a chip too, but the line is so long. I don't know anyone else who can readily get a new tune for me.
2009-02-03 18:25:38
#4
Ashton I wish it didnt have a rev limiter lol. I like not having a rev limiter. Ive been driving my car like that for two years with no problems. But Ill take that chip. PM sent.
2009-02-03 19:57:51
#5
Originally Posted by ashtonsser
Let me know cuz i think calum is out of town till sunday when i tried to call him.


Good deal. That's helpful to know. Ive been trying to get in touch with him also
2009-02-03 21:47:19
#6
I've just been slammed with the day job, sorry.
2009-02-03 21:47:36
#7
Originally Posted by Johnny
Ive already got the ECU socketed for a basic program running a 50lb setup. I wanna run a 750cc setupo now. Can you just send me the chip? Also is it easy to replace them?

I need:

Z32 Maf
750cc Inj
No rev limit
8.5 DET program


What brand injectors?
2009-02-04 02:43:33
#8
Calum they are going to be the RC's 750's in high impedance.
2010-06-23 12:20:20
#9
Did you get the bin? I need a similar setup
2010-06-23 16:44:20
#10
dude this thread is more than a yr old.. calum is no longer in business either btw.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top