Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Maxima Brakes

+ Reply To Thread
Posts: 21-24 of 24
2008-08-23 05:55:24
#21
ah gotcha
2008-09-11 17:58:04
#22
andreas you get my pm?
2008-09-11 18:22:14
#23
Originally Posted by sr20jet
No 4x100 rotors will fit using the Max rear calipers, you will need the Max rotors to be re-drilled.

It's why I posed the question about P10 rear calipers if they are verified to fit on a B14 since the NX Rear ABS rotors is a direct fitment for the P10 calipers, no need to re-drill bolt pattern.


wrong, NX with ABS rotors will fit with the Maxima calipers. both maxima and P10 use 10" rear rotors. the only difference is the profile of the calipers itself and the lug pattern.
2008-09-11 18:31:49
#24
Well, there is actually no NX2000 ABS or non ABS that came from the factory with those 10.1 rotors. This is a fact and was a mistake make in the Nissan parts catalogue. Thats why these 10.1 rotors can be found aftermarket as they made them of of Nissan mistake.

All SERs and NX2000 ABS or non ABS share the same rear rotor.

All NX2000s ABS and non ABS have the same big brake in the front known as AD22F.

All SERs with ABS and non ABS have the smaller rotor in the front.

The Calipers that fit the suposed 10.1 JDM NX2000 ABS rotor is the 93-94 Maxima SE with twin cam motor or the 91-96 G20.


These are undisputed facts.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top