Thread: AGX + Hyperco Gen II + bad roads = 40mm or 55mm bumpstops?

40mm is what I am running with no issues.hyperco/csk
that what I ran with hyperco/agx and roadmagnet/agx also.

so should i cut them or no? Also do they need to slide over the strut nicely? these I have to force on so I'm thinking about taking a dremel to the insides to make it nice.

yes,cut them to 40mm.it doesnt matter if they slide up and down on the shaft.Its probably better so they can stay up in the strut tower out of the elements down by the strut.
I would not dremel them personally,but it probably wont matter either way.
Maybe someone else will chime in on this for you as well...

Ya thats my only concern right now as the stock ones have a small opening but once you get them on they are kinda snug they slide up and down the strut nicely. These koni take some work to get on. The diameter of the koni is way smaller then the agx shaft.

I did a search for you...forgot about this thread I posted in .
http://www.sr20-forum.com/suspension/46022-koni-bumpstops-csk.html
Check out my posts here...what are you using for dust boots?

and this...part#s
http://www.sr20-forum.com/information-library/16856-agx-koni-rod-diameter.html

Bam search FTW thanks Jay!! Just when you think you have read every thread.

Also this is the place I got my bumpstops from http://www.jerrybickel.com/search?query=koni&submit.x=0&submit.y=0

I love greg but his cost was like 25 bucks a piece so i ordered from these guys.

OEM boots from greg V

I just searched "koni" titles only and ..yeah...BAM!! there it was..LOL
Thanks for the link ,thats a good price.

ya greg he told me to get them elsewhere. He is so honest he said sorry dude my price is 27$ get them some place else.