Thread: Front B13 and b14 suspension identical? Can be bolted right up?

I can't seem to find it with my piss poor search skills right now but I seem to remember from way-back when that it has been proven and said that FRONT b13 and b14 are identical (meaning one can take off complete assembly from a b14 and bolt it right into the front of a b13). <-- talking about front only here

^ I've done the above with a p11 front bolting into a p10 front but never tried it with a b14 to b13 so was curious to know if anyone has done it and can verify with 100% confirmation that it works or doesn't

thanks in advance

yes same

They bolt in the same but they are far from identical.

thanks. this is what I was most curious about

What are the differences out of intrest?

I just installed a set of front KYB agx struts and eibach lowering spings in my B13 that came off a B14 so yes they bolt up.

What about the steering knuckle on a B14, will that fit a B13 SE-R? I'll probably need to pick up spares at some point...

same yes

..and as it turns out, we had a b14 SE-R steering rack in our B13 SE-R for years.. so that'll work too.. lol

Thats interesting because I have a B14 parts car here that has a recent remanned rack and an nx2000 that needs a rack.
I measured them both and they are different and also hook up to the lines different...maybe I need to go revisit this because it would save me some money and time using what I have rather than ordering a new rack for the nx.