Thread: Lightweight 15 inch wheels (15-inch, 4X100, offset fits our cars)

man i wish those konigs spooled came in 17"

id really need to find some 16's that fit over my brembos, or sell them & go to the Wilwood brakes...

Way better option. Wilwoods are lighter anyway. Reduce that unsprung weight, Steve.

x10000

I can confirm that a 15x8 +35 will clear the rear struts with a minimum of 5mm spacer for the rear. It clears the fronts just fine direct fit. I currently have 16x8 +38 Enkei RPF1 with 215/40R16 Yokohama S-Drives and Wilwood 11" BBK on my B13 and all I needed was a 5mm rear spacer and Nismo long studs for everything to be fine. The clearance with a 5mm spacer on the rear is plenty, leaves about 2-3mm clearance between lip of wheel and rear strut tube for a +38 offset wheel, even more for a +35mm offset wheel.

ssr type f 15x7 offset35 - 10pounds

@Andrew(nj) nice wheels, I added them into the Forged section.

Team Dynamics Pro Race 1.2, ~13lbs
It is a popular wheel with Miata spec racers. Also one of the few wheels at 15in that will fit a big brake kit.
I have a set of 15x7s on my Sentra. I always get compliments on the wheels.
You'll probably be best off with a +35 offset. I went with a +40 and I needed a 5mm spacer and Nissan armada studs in the rear to fit without rubbing(KYB AGX).

Good call and good info.

I added it in under cast wheels.

...and shameless plug I'm selling a set of the 15x7 Team Dynamic's in the wheels/tires FS section

In my research I learned that Team Dynamics is made by a huge wheel manufacturer in Europe who is an OEM supplier for a whole laundry list of boutique and upper echelon auto marquees. They also manufacture a pretty good number of race series spec'd wheels for motorsports. Like this particular wheel for Miata racing.

All kinds of stuff I find out when I make a thread.