Thread: 1 inch master cylinder for n15 almera (equivalent to b14 sentra)

Hello all,
I currently run 280mm twin pot front callipers from a mitsubishi fto; At present, I feel that the pedal is too low and the brakes cease to function so well once they are getting hot on the track (I run high temp fluid and ds2500 pads). Does anyone know of any off the shelf 1" abs master cylinders that will fit straight onto the car with minimal hassle? For reference, these cars run 256mm front discs as standard with single pot front callipers.

Thanks in advance

altima 1inch

Ok thanks! Is there a way of determining what year/model cylinder is required or did they all use the same master cylinders?

seems like everyone needs hand holding these days

merry christmas
https://www.rockauto.com/catalog/x,carcode,1210565,parttype,1836

thanks for your help; just making sure as they don't make altimas this side of the pond!