Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: 1 inch master cylinder for n15 almera (equivalent to b14 sentra)

+ Reply To Thread
Posts: 1-5 of 5
2014-12-22 14:06:29
#1
1 inch master cylinder for n15 almera (equivalent to b14 sentra)
Hello all,
I currently run 280mm twin pot front callipers from a mitsubishi fto; At present, I feel that the pedal is too low and the brakes cease to function so well once they are getting hot on the track (I run high temp fluid and ds2500 pads). Does anyone know of any off the shelf 1" abs master cylinders that will fit straight onto the car with minimal hassle? For reference, these cars run 256mm front discs as standard with single pot front callipers.

Thanks in advance
2014-12-23 09:24:32
#2
altima 1inch
2014-12-23 09:59:00
#3
Originally Posted by nickr
altima 1inch


Ok thanks! Is there a way of determining what year/model cylinder is required or did they all use the same master cylinders?
Last edited by green-gti on 2014-12-23 at 10-05-50.
2014-12-25 21:51:32
#4
seems like everyone needs hand holding these days

merry christmas
https://www.rockauto.com/catalog/x,carcode,1210565,parttype,1836
2014-12-29 20:35:41
#5
Originally Posted by nickr
seems like everyone needs hand holding these days

merry christmas
https://www.rockauto.com/catalog/x,carcode,1210565,parttype,1836


thanks for your help; just making sure as they don't make altimas this side of the pond!
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top