Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: How many interested in a new high end coil over at a good price?

+ Reply To Thread
Posts: 121-129 of 129
2016-01-08 16:07:23
#121
Originally Posted by team
So "KW" makes coils overs for our classics?


I would contact them. Other than that, this company doesn't seem to bad I would research more reviews

CEIKA | Custom Coilover Kit - 2-way Mono Tube Inverted

But for a 2 way built to order coil over that is a very good price.
2016-01-09 05:39:40
#122
I have a set of teins but the fronts need rebuild... I might do it my self
2016-01-09 05:48:54
#123
Originally Posted by team
I have a set of teins but the fronts need rebuild... I might do it my self


Yea man definitely try that. After that I say look into tires & bushings as the next mod
2016-01-09 06:02:21
#124
I also have progress front and rear sway bars and cusco front strut bar ... But I'm going to start on my brakes.. Because I topped my car out and then it wouldn't stop and I worped my rotors pretty bad
2016-01-09 15:07:26
#125
Originally Posted by team
I also have progress front and rear sway bars and cusco front strut bar ... But I'm going to start on my brakes.. Because I topped my car out and then it wouldn't stop and I worped my rotors pretty bad


That should stiffen up the chassis & reduce some body roll
2016-01-25 01:23:44
#126
Originally Posted by coach

I won't sit here and say CSK are the best, I know they aren't. Hell, I HATE KONI SHOCKS/INSERTS! But, I will say, that a properly set up adjustable CSK with Swift springs, and a quality camber plate/pillowball mount setup can run circles around 95% of the coilovers out there.


I will also say that running a maxima housing (or custom tube housing of that size) will allow the use of a Bilstein insert which in my opinion will get you much better results than the Koni inserts.



hell none of us are even spending $2500 on a suspension.



What do you like about the Bilstiens over the Konis? I've found the opposite to be true.


Speak for yourself
2017-02-23 11:44:24
#127
And like that it's has been another year.
MeisterR have been operating in USA now and are looking at the RNN14 again due to request from the Pulsar community.

I get odd request here and there for the N15 / B14, but not enough to justify production.

Anyone interested in any particular application?

Jerrick
2017-02-23 14:02:35
#128
We have Fortune Auto making stuff and now YCW making stuff. Hop on board, MeisterR. I just bought a set from each manufacturer so I am good for a few years. If you made them when you were first on here, you could have sold those almost two dozen sets all to MeisterR!!!!
2017-02-23 14:18:29
#129
This is just to check interests as there wasn't really any last year when I posted.
When I posted the dyno info, we didn't even get a comment.

It is just we are getting request in the UK for the N15 as well as the RNN14 Pulsar GTiR
So we are just checking to see if there are interests in the USA for us to extend the production for USA stock also.

Jerrick
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top