Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Shigspped coilover help

+ Reply To Thread
Posts: 1-7 of 7
2014-02-10 13:05:56
#1
Shigspped coilover help
Ok so before anyone asks yes I searched. I picked up a set of shigspeed coilovers and I am at a complete loss as to how the rear mount, well mounts? I remember reading something about trimming that needed to be done to make it fit but I cannot find this info anywere. Also need to know the torque specs of the rod nut to the ground control plates. Thank you in advance
2014-02-11 21:05:30
#2
Shigspped coilover help
For the b13, there's nothing special to it. Are the shocks off the top hat?

Sent from my iPhone using Tapatalk
Last edited by Keo on 2014-02-11 at 21-13-12.
2014-02-11 21:11:31
#3
B13
2014-02-25 01:10:33
#4
Originally Posted by Keo
For the b13, there's nothing special to it. Are the shocks off the top hat?

Sent from my iPhone using Tapatalk


I figured it out lol. My other question is I have very minimal tire clearance with these installed. Tire size is factory, for now anyway. I am just concerned because I can barely fit two fingers in between the housing and the tire
2014-03-02 01:23:19
#5
Originally Posted by jay121312
Originally Posted by Keo
For the b13, there's nothing special to it. Are the shocks off the top hat?

Sent from my iPhone using Tapatalk


I figured it out lol. My other question is I have very minimal tire clearance with these installed. Tire size is factory, for now anyway. I am just concerned because I can barely fit two fingers in between the housing and the tire


Two fingers? I have a few mm's between the housing and the tire!
2014-03-02 01:57:22
#6
Two fingers is more than any of us has. We're lucky to get 2mm. =P
2014-03-02 03:32:59
#7
Have you really done your research?
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top