Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Where to get Nx2k rotors

+ Reply To Thread
Posts: 1-8 of 8
2014-01-11 22:06:27
#1
Where to get Nx2k rotors
Where do I get these for the cheapest. Nothing fancy needed, just some blanks.... I know advance auto has some for 32 ea but not in stock in my area. Lemme know any website or vendor deals thanks
2014-01-11 22:46:32
#2
rockauto and i have some in my basement i would sell cheap still good condition
2014-01-12 04:13:27
#3
brakeperformance.com
2014-01-12 13:38:07
#4
This place always have great prices on Brembo blanks: Import Replacement Parts

This thread also has a bunch of info: http://www.sr20-forum.com/brakes-suspension/41288-b13-maxima-rear-brakes-d-s-question.html
Last edited by BenFenner on 2014-01-12 at 13-41-52.
2014-01-30 17:17:06
#5
Go to autozone. but search in every year, say 1991 thru 1993. If i search 1993, nothing shows up for the rear. but if you search 1991, you can find the jdm nx 258mm (aka maxima rear) rotors for around 14$ or something for the duralast brand. I will get those for my rear conversion. The fronts are pricey since they're vented, so most places here, O'Reilly, Autozone, Napa...will be around 45$/each. You can go rockauto, but shipping is about $15/each, so I chose to jus go to the local parts store. That's the most accurate info. It's a pain searching thru parts for these cars since its all mixed up and nothing seems to be right. Only trial and error... Good luck!

On a side note, Rock Auto seems to have vented rear 258mm & 24mm thick or something(not sure of exact thickness). I wonder if those will work....
2014-01-31 20:24:06
#6
Get 'em from Greg
2014-01-31 21:10:17
#7
Front or rears?
2014-02-01 14:45:51
#8
Originally Posted by Keo
Front or rears?


Ad22vf fronts

I had two wrong deals as it was not 258mm at a local parts store, I need part #'s or some link for a better buy.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top