Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Wheel questions

+ Reply To Thread
Posts: 1-8 of 8
2014-01-09 13:36:13
#1
Wheel questions
So did some thread searching and cannot find anything concrete. I would like to know what offset and hub diameter I would need to run a set of 15x7 wheels on a b13. Any help is appreciated, also opinions on this wheel would be appreciated as well
2014-01-10 02:29:03
#2
+35 is the perfect offset
59.1 hub bore
2014-01-10 02:47:44
#3
If the hub bore is larger, will there be an issue with fitment?
2014-01-10 03:02:26
#4
Yes - however you can get hub centric rings to take care of the problem.

https://www.google.com/search?q=hub+centric+rings&espv=210&es_sm=93&source=lnms&tbm=isch&sa=X&ei=WWLPUqTdLcj8oASrr4D4CQ&ved=0CAkQ_AUoAQ&biw=1097&bih=554&dpr=1.75
2014-01-10 03:11:22
#5
I run +25 on my 15x7's
2014-01-10 22:01:27
#6
I am aware they make hub centric rings, i am not certain as to why they would be needed on se-r because i was under the impression they were not...... Can anyone shed some light
2014-01-10 22:35:37
#7
read what you asked and the answer given thats why they would be needed and only then
2014-01-11 00:04:15
#8
I'm currently running 15x7 +35's and they fit perfectly with 225's




Although i'll be stepping up to 17x9's this year to fit 255's
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top