Thread: help w. my suspension fix , thread .

formally known as : wheel bearing / wheel hub(fixed), ... now Axel(s)


are these a good choice? i need one for my driver side asap. just wanted peoples opinion before i buy .
bearings
2001 NISSAN SENTRA Wheel Bearing
- More Information for TIMKEN 510061
hub
2001 NISSAN SENTRA Hub

I did the Beck/Arnleys for my P10. dont go cheap, this is not something you want to do again.

getting the becks n arnleys. its only one bearing correct? dont know if i should get another for my passenger side, its not going bad but maybe advisable?

I would always do the pair but it is not needed and there is no time saved by doing it now. You will need the alignment done after you replace the bearing, that would be the only overlap between the two. It is up to you what you want to do.

pictures !!!!

ok wheel bearing fixed but new problem . the axel driver side. which brand recommended? when he took the wheel off there was grease everywhere.

oem axle is the best option or rebuild the boot

GregV sells a ISO certified Chinese axle, which is quite a bit less $ than it's Japanese counter part. I've run it for about 2 years now, including a few track days, without issue. It's your best bet, if you don't want to screw around with old and or re-man stuff.

EMPI makes new axles for our cars. One or two other brands also make new axles.

i do not reccomend the empi axles.. they dont fit right, well atleast the one we have doesnt..

see how we kinda had to "Rig" it up?



thats a passenger side.. it seems they placed the carrier on this one in the wrong spot.. the axles fully seated in the trans and hub. we are using the right axle bracket (tried 2, both from b13 se-r's) and theres nothin wrong with the mounting location or anything like that..