Thread: B13 ebrake?

So I replaced the rear brake pads yesterday in my 92 Sentra SE-R.... but apparently I somehow also disconnected the ebrake cable. WTF?

Maybe you need to adjust it.

Is it true you can just pull the e-brake up totally when stopped, then go in reverse and that resets it?

Edit: nope, didn't work. Damnit. Oh well, worth a shot.

There is a nut under the actual handle that you use to adjust i believe

Ok, so you're talking about inside the cabin. Do you need to do this everytime you replace rear pads?

with time the cable will stretch and as long as you put the pads in correctly you shouldnt have to adjust it too much.

I would raise the rear of the car and remove one of the wheels, have a buddy pull the e-brake and check to see if the pad moves. if it moves than you're good just need to adjust it, if not its probably not connected but I doubt you'd forget to hook up the cable to the bracket...

Gotcha, thanks!!