Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: prothane motor mount problems

+ Reply To Thread
Posts: 1-10 of 10
2012-10-24 00:51:46
#1
prothane motor mount problems
I am trying to install the prothane motor mount kit and the inserts for the rear/transit mount are too small. The instructions do say it is for a b13 and I am installing it on a b14. Do I have the wrong kit? The pass mount fits fine though.
2012-10-24 01:13:00
#2
Pictures or kit item numbers?

The mounts are the same so something else is wrong here that we as a forum do not know, yet.
2012-10-24 01:13:56
#3
They're the same put them in.car will feel much better
2012-10-24 01:15:21
#4
notch the pass side to reinstall bolts and yure good
2012-10-24 01:16:06
#5
I'll snap some pics when I can. The kit is 14-1901 (which is correct) and the bushing has the number is U-69126 stamped on it.
2012-10-24 02:56:07
#6




I guess they sent me the wrong ones in the kit...and since I already destroyed the other ones, i'm f'ed.
2012-10-24 09:10:23
#7
I figured it out. It turns out that with some of the rear mounts you have to retain the metal ring. Luckily I was able to re-insert the ring and burn out the rubber...and now I have even more of a reason to dynamat my car lol. Thanks for the help.
2012-10-24 19:19:08
#8
hmmm my prothanes do not look like that..mine are flat on each side & its also a 2 piece bushing
2012-10-24 19:40:01
#9
Mine has a two piece bushing as well but that one it for the pass mount. These in the picture are for the rear/drivers mount. I didn't have time last night to do the drivers mount but I am about to so we will see how that one goes.
2012-10-24 20:39:07
#10
ill post pics when i get home of my rear x member mount
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top