Thread: prothane motor mount problems

I am trying to install the prothane motor mount kit and the inserts for the rear/transit mount are too small. The instructions do say it is for a b13 and I am installing it on a b14. Do I have the wrong kit? The pass mount fits fine though.

Pictures or kit item numbers?

The mounts are the same so something else is wrong here that we as a forum do not know, yet.

They're the same put them in.car will feel much better

notch the pass side to reinstall bolts and yure good

I'll snap some pics when I can. The kit is 14-1901 (which is correct) and the bushing has the number is U-69126 stamped on it.

I guess they sent me the wrong ones in the kit...and since I already destroyed the other ones, i'm f'ed.

I figured it out. It turns out that with some of the rear mounts you have to retain the metal ring. Luckily I was able to re-insert the ring and burn out the rubber...and now I have even more of a reason to dynamat my car lol. Thanks for the help.

hmmm my prothanes do not look like that..mine are flat on each side & its also a 2 piece bushing

Mine has a two piece bushing as well but that one it for the pass mount. These in the picture are for the rear/drivers mount. I didn't have time last night to do the drivers mount but I am about to so we will see how that one goes.

ill post pics when i get home of my rear x member mount