Thread: Lugnuts?

Hey guise,

I searched a little bit, but wanted to see if I could get a recommendation from some of the gurus here. My enkei RPF1 15x7 4x100 35mm offset wheels just arrived...but I guess I need lugnuts for them, doh. There are some dead links in the manifesto under lug nuts. Anyone recommend a good set of lug nuts?? I've heard muteki is a good brand, but don't know specifics. Thanks

I was looking at these, but it seems expensive for lug nuts?

MUTEKI LOCK SR35 WHEEL LUG NUTS 12X1.25 M12 1.25 ACORN RIM CLOSE END 20 SILVER S | eBay

That's considerably more than I'd pay for Muteki's, but you're also not choosing the typical spline drive, so that is probably the reason for the increase in cost. I paid $55 shipped for my Muteki spline drives (black, 20EA with key).

Under "A Few Words About Wheels & Tires"....

http://www.sr20-forum.com/information-library/1801-b13-b14-b15-suspension-information.html#post24096

Is this thread:

http://www.sr20-forum.com/suspension/44478-extended-lugs.html

Which has some pretty good info. Muteki's are certainly popular.

I followed Ameen, and bought the Muteki SR48's to use with my ARP extended lugs. Which look terrific together, with the OEM lug nuts, the ARP's looked goofy as hell.

I don't have much of a frame of reference, but my Mutekis are very nicely finished/manufactured.

I paid about that same amount.

Amazon.com: Muteki 32905B SR Series Black 12mm x 1.25mm SR48 Open End Lug Nut Set, (Set of 20): [email]Automotive@@AMEPARAM@@http://ecx.images-amazon.com[/email]/images/I/41S6PFNh2gL.@@AMEPARAM@@41S6PFNh2gL

I went there Shawn, but the link for the lugs he chose were bad (http://www.autopartsdealer.com/kics_project_muteki_sr48_lug_nuts_32905n-p487326-p.html) I guess I could have just searched that part # tho....also I have stock lugs.

I went with the SR35 lugnuts I mentioned earlier.