Thread: Go lower on KYB AGX's w/GC coilovers?

I want to go about 1/2-1 inch lower. Only problem is my coils are at there lowest setting. Any reconmendations? Mabey a different spring? Let me know

Don't run a spring.. Why have suspension travel.

More information necessary for effective recommendations.

How far below stock ride height are you right now?

What total drop are you looking for?

Camber plates, my car sits low and rides great. They give you an extra inch of suspension travel.

I don't really have much for the stock facts. I never paid attention where the car sat before I lowered it all the way. I also bought the car with the suspension on it. So I can't really tell you how low from stock I want to go. I'll guess and say 3.5-4 inches.

I'll give that a shot. I had the GC camber plates on my black B13. It seemed to sit lower with the same suspension.

Yer' killin' me here.

You have three-inches (3.0") of suspension travel stock. How's that for the stock facts?

Remove your entire suspension, weld the frame to the axles. Done.





Do it right, or not at all. This should help.

http://www.sr20-forum.com/suspension/52765-those-want-go-low-how-i-extended-my-front-control-arms.html

http://www.sr20-forum.com/suspension/45967-calling-b13s-low.html

Best of luck to you.