Thread: Progress Rear Sway Bar Help!

I am looking to have a set of the rear trailing arm brackets (the ones that need to be level when the car is on the ground) fabricated, as i do not know where mine went. Progress will only sell me all of the rear hardware as a package...for $114 + shipping. I only need the two brackets so, if anyone can help me out, or knows someone who can, please let me know!

Thanks guys!

Branden
aka hawaiiaNX

FYI they don't have to be level, actually if your car is lowered any then having then not level is mandatory IMO.

Anyway, have you seen pictures of them? They are just a 90-degree angled piece of metal with two holes and some supports. Can't be that hard to make.

Yeah, i used to have mine, just dont know where they went. They do seem pretty simple to make...but i dont have access to a welder, nor would i know how to weld. I just figured if someone had a set handy that they could use as templates to make other ones, it would probably be a lot quicker for me to get.

I have been trying, and will continue, to look around but most of the shops around here want at least $30 minimum to weld anything. So if anyone can help out, please let me know.

Thanks guys.

Branden
Aka hawaiiaNX