Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: BRAKE UPGRADE help!!!

+ Reply To Thread
Posts: 11-16 of 16
2012-03-27 19:19:46
#11
got u thanks for the info guys really appreciate it im looking at the part in auto zone now
2012-03-27 19:29:15
#12
found it loaded brake cal come with the bracket and everything
2012-03-28 02:24:02
#13
Originally Posted by STRATTON
ive had some pretty hp set ups in the past. my nx2k brake set up always worked good. granted my car is about 2300 pounds so a few hundred pounds lighter then most peoples b13s.

currently it is. new altima brake booster, altima master cyclinder, stanless braided lines all around, factory nx2k calipers, autozone pads and rotors. i just recieved new stop tech front pads, ceramic rear pads and am going to go get new blanks for all around. gonna install those parts and flush out and bleed the systems fluid. stopped great before, should stop even better now.

stratton.


Which brake booster are you using? The Altima brake boosters I've compared in the junkyard had the same part number as on my 92 SE-R.
2012-03-28 02:27:24
#14
i have a p11 front setup for sale (front calipers, brackets, & rotors)
2012-03-28 23:04:22
#15
just a reminder that good tires are key to good braking and handling. With 160+whp on a sentra on a 15x7 at least get you some azenis or something equal. tires were my weak spot with 196whp, nx brakes and well sorted suspension, and that was running 205/50/15 azenis. I would recommend at least 225 tires equal to or greater than an azenis
2012-03-29 23:58:06
#16
thanks for info guys
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top