Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Whiteline bar installed today

+ Reply To Thread
Posts: 71-80 of 110
2013-04-24 14:37:25
#71
Mine dont squeek... but i did not greased them a lot, just enought for the bar to move free on the bushing, and also as you, i tightened it hard.
2013-04-24 15:30:46
#72
OK I'm going to move the D bushings to the outside. Also, it appears that I put the bolt/nut in the reverse order. If you look at the pic I posted you can see I put the nut/bolts in the reverse order of what's recommended in the instructions. I'm going to fix all this and see if that makes the squeaking go away. I'm guessing it will. Basically everything is reversed and fucked over...balls!!

-G
2013-04-24 16:47:18
#73
See if you can get the metal inserts out of the endlink poly's and grease them up too. That may be where the squeaks are coming from.
2013-04-24 19:34:31
#74
Originally Posted by hammerin
See if you can get the metal inserts out of the endlink poly's and grease them up too. That may be where the squeaks are coming from.


I'm going to install everything proper first and then see if I still have the squeaks, but I'll have to remember that if I still notice it.
2013-04-25 17:45:16
#75
What a read... Now that I am up to speed I have a few questions...

Has anyone upgraded from the Progress Bar to the Whiteline Bar or am I going to have to find out for myself ???

a MSRP of $239 seems high - What are you guys paying on average ???

Thanks
2013-04-25 18:51:06
#76
I paid 300 USD but that is because im in Costa Rica and i had to get that shipped to Miami and then to Costa Rica...

Now, i found that on Ebay, let me check... I was not able to find it, i bought it on Ebay for 197USD

But i found it on another site:
BNR21Z Rear Sway Bar - 20mm - Adjustable

Hope this helps,
2013-04-25 20:12:42
#77
Thanks - So far I have found it for $200 local - Really would like some more feedback from people that have used both on the rear of the B14.
2013-04-25 20:22:13
#78
I paid $200 shipped on ebay from autoanything.

-G
2013-04-27 05:46:09
#79
Wouldn't mind grabbing 1 of these before my engine sway, most important my exhaust piping upgrade...Cheers bro, all d best
2013-05-02 14:08:33
#80
I have a update, yesterday i was able to push my car on a couple of corners in the highway at "high speed", no these corners i normally was able to go up to 100km/h pushing the car... and yesterday i tried it, and at 100km/h the car was super stable, so i continued that way and then i noticed that i was going at 120km/h and the car was still really stable and without heavy body roll... im so happy to have this swaybar installed really really worth it!!
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top