Thread: Info Request

I am looking for the measurements of the rear lower control arm bolt that goes through the spindle on a B13. The listing for the P10 and B13 are different so i want to see what is different.

I need:
Length from the bottom of the head to the end
Diameter
Length of the threads

55023A is what i am looking for.



Thank you.

Oh boy do I have you covered...

Proper part numbers:

Length of shaft including threads.

Length of bolt including head?

Sorry I don't have thread pitch info or shaft diameter info...
If I had to guess having seen plenty of threads in my day, I'd say the threads are 1.5 mm between and shaft diameter is probably 14mm.

This is for a B13 by the way.

When you say the listing for the parts are different, are you looking at actual Nissan part numbers, or Courtesy Nissan fake numbers?

Greg @ Gspec said the P10 and B13 part#s are different. I will measure mine when i get home to see if they are similar.

Thanks for the info. Not much thread there so not too much room for error if they are that different.

This is what it looks like installed, so you'll see what kind of thread needs a B13 has.

I almost bet they are the same, the spindles look very close to the same.