Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: my suspension!!

+ Reply To Thread
Posts: 51-60 of 351
2011-12-31 18:43:33
#51
Originally Posted by hmong_b13
which bolts? there's three bolts.


from the looks of that tie rod it looks like it will accomadate the bumpsteer. you pretty much mount the tie rod on the bottom part of the knuckle not through the top. its a little complicated.

if you could figure it out and the tie rod will allow it. it will help your steering when LOW. ive been looking into doing it for a while.
2011-12-31 18:44:07
#52
Originally Posted by PEDRONX2k
i was going to ask this... my is powersteering...the pn numbers i looked up matched ...im going to try mine in about an hour...


let me know if it fit.
2011-12-31 18:45:21
#53
Originally Posted by kaotekxe
from the looks of that tie rod it looks like it will accomadate the bumpsteer. you pretty much mount the tie rod on the bottom part of the knuckle not through the top. its a little complicated.


the tie rod will be mount on the top of the knuckle not the bottom!!
2011-12-31 18:56:42
#54
i did a quick search and seem like the 2.0 power steering and 1.6 manual steering share the same pn like the s13, but how come my inner wont fit? grrr maybe they shipped me the s14 inner instead the s13?
2011-12-31 19:09:44
#55
this part didnt fit, it was to big!


took out the other part of the axle!!


took out the inner rod boot!

\
2011-12-31 19:21:04
#56
Originally Posted by hmong_b13
i did a quick search and seem like the 2.0 power steering and 1.6 manual steering share the same pn like the s13, but how come my inner wont fit? grrr maybe they shipped me the s14 inner instead the s13?


but the s14 are suposed to be the upgarde ,thicker, than s13
2011-12-31 19:23:25
#57
i have no clue now..lol..im about to sell them!! if anyone interest pm me!!
2011-12-31 19:25:05
#58
Originally Posted by PEDRONX2k
but the s14 are suposed to be the upgarde ,thicker, than s13


im just waiting for you to install them to see if it fit, if it does then maybe its for power steering only.
2011-12-31 19:37:28
#59
Originally Posted by hmong_b13
im just waiting for you to install them to see if it fit, if it does then maybe its for power steering only.


Ok.I'll let you know,...
2011-12-31 20:46:05
#60
^ok..
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top