Thread: Need to know what kind of Sway Bars these are.

i thinks that's the reason for doubling up on the plates. to space the bar down. so it doesn't hit the arms.

i need to get the plates as mine is hitting and the u bushing is shot to hell on the drivers side.

I had all new bushings and both plates on the last one.It still rubbed,and the car was not that low either,Hyperco/agx on one,and RM/agx on the other..

mine rub horribly, but I do like the handling. I haven't experienced any more or less understeer though. But my broke @$$ still using 20 year old shocks and some tein springs I bummed off a friend. I didn't know about the plates for the brackets when I put it on my car, so I only used one stack instead of 2 stacks. over the winter I will be fixing everything back up right with some suspension and what nots.

nevermind

arg

I had ST front and rear,so first I kept the rear ST with stock,then I changed to a whiteline rear since I found a great deal on it(its adjustable and has better endlinks for less binding)
...this is my current setup.
stock front,whiteline rear.

nevermind

you can't use the sperical link in the frt. you can in the rear though. my st for the rear was modded by shig and has adjustable sperical links.

nevermind

since it mounts under the arm u don't have enough room.