Originally Posted by justin2386 
i just so happened to be at pepboys today and asked them to look up the hubs because i had an idea..why would nissan make 2 different beams for the drums vs. discs? they didnt have any in the store so i had the guy look up the part numbers and ALL the b14s have the SAME part number..all 200sx's AND sentras with 1.6s AND 2.0s, and rear drums AND discs..so does that mean i can get away with using my same hubs then?
The hub, i.e the bit with the studs and bearing is the same but the end of the beam where there is either a mount for the brake drum backing plate (4 bolts) or the 'ears' for the caliper is different.
So yes, nissan did make 2 different beams for the two different cars depending on the rear brakes.
Be the first to like this post.
Back to top
