Welcome to the SR20 Community Forum - The Dash.
SR20 forum logo

Thread: spev v brembos to a b14

+ Reply To Thread
Posts: 1-10 of 17
2010-10-26 15:07:24
spev v brembos to a b14
wat all is needed and how hard it it.

Id really like to put the brembo kit from the b15 on my b14

2010-10-26 15:10:06
option a: make a custom bracket

option b: convert to 4x114 all around.
2010-10-26 16:43:47
option c: Willwoods....
2010-10-27 07:06:11
option d: convert to 6 speed transmission and use the B15 knuckles. You can go 4x144 (as the B15s are) or redrill the hubs for 4x100 to match your rears.
2010-10-27 08:55:51
option E: get a G20 P10 or P11 less work needed to put them on there. I am soooo gonna get a set of these for my P10 later on down the road. Good luck to you with you swap sir.
2010-10-27 14:34:23
i just want to know what is needed to make it fit my b14. thanks
2010-10-27 14:38:06
Without doing much custom work, you can use B15 spindles with B14 hubs (or B15 hubs if you want 4x114.3 in which you would need B15 outer axles/b14 inner axles)
2010-10-27 17:27:05
B15 spindles will bolt on the the B14, swap in a B15 rear beam, Axles, i think, you can just use a B15 axle. Not sure though, I thought the inners are the same, just the outers are different. You will then be 4x114 all the way around.
2010-10-28 12:02:22
damn..i typed it in backwards..fucckkk my life..damn..lol
2010-10-28 22:54:36
I meant the whole spindle and hub assembly, sorry. I will change the post.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)

    Back to top