Thread: B13 CSK Research Thread - OE diameter springs

Koni Part Number: 8610 1409Sport
The above part is designed for Spec-V front strut housings
Found them at Summitt Racing for $$147.00 each

You will need a pair (left & right) of B13 OEM FRONT STRUT HOUSINGS
(yes for front housings for the REAR of your B13)
(2) B13 OEM FRONT STRUT DUST BOOTS
(with these you can remove the OEM bump stop and replace with a better Koni Bump Stop)


Koni Bump Stop Part Number:
(need to dig around and find this)

The rest of the parts are OEM Rear B13 parts:

^strut dust boots in above pic are FRONT strut dust boots

Here are some part numbers for what you are looking at. The kind gentlemen at G-Spec got them all shipped to me awfully darn fast.










comes with everything you see here:


aside from the strut insert itself, here's a close up of the parts it comes with:


Here is a front B13 strut housing and the koni strut, both cut to "shorten" the strut.

Yes sir, thats what i did, but you can get them cheaper than that. I got mine from some place in Texas and the total for 2 was like $212.00.

St bars in B13 rear don't mount to the strut.

What does the ST sway bar mount to then?

mounts with the trailing arm bolt on the bottom of the hub. well thats where my old st bars mounted. same spot as the Progress stuff. the ST bars just dont stick out as much as the progress stuff does.

Ah ok, well maybe I'll end up giving it to a friend for helping me install some stuff..

Has there been a way figured out to easily put the yellows in the rear?

links to that place

i thought for sure the answer was "B13 front housings"

yeah, and how good was their customer service? Summit Racing has a great reputation, fast, friendly, reliable..

its almost worth a few extra bucks...