Originally Posted by BenFenner 
Okay here is the exact steel spacer I remember. Made by Project Kics. Sounds like I should have recommended these to begin with. =(
Project Honda S2000 Part 3- Brakes that don't Break
That one is 10mm and doesn't change the bolt pattern, but I believe if you asked nicely they might be willing to do that, and hook you up with hun-centric/wheel-centric provisions. It would be worth a call I think at least. That is of course if you have room inside between the tire and the spring perch, and you want to pull those babies inboard some.
but if you doo these the stock wheel bolts will stick out past the keyed nut and then the wheels might not get flush with the spacer...
when i used the SAME style as these.15mm i had to grind down about an inch of the stock stud so my wheels sat flush with the sapcer....
kinda hard to describe without pics....
but looks cool happynole...now drop the height about an inch amd add some subtle fender flares and call it a day
Be the first to like this post.
Back to top
