B13 GC w/ AGX question
Just finished installing this and I had to crank the fronts all the way down to get it even with the rear (about 1" lower than stock). Is that normal? Perhaps the front springs are longer than the rears (doesn't make much sense to me)?
The spring rates are 250/200 I believe. I have the stock mounts in the front and rear (with the cone shaped upper spring perches for the gc's). The rear mounts are chopped up to not include the upper spring perch. The front mounts are unmolested.
Any insight is much appreciated.
The spring rates are 250/200 I believe. I have the stock mounts in the front and rear (with the cone shaped upper spring perches for the gc's). The rear mounts are chopped up to not include the upper spring perch. The front mounts are unmolested.
Any insight is much appreciated.
Be the first to like this post.
Back to top
