Thread: csk's

won't come up at all. site not found, or can't display page.

What do you get when you do a trace route to it?

In windows, go to start --> run

then type: cmd

then when that opens, type/paste: tracert [url]www.sr20forum.com[/url]

lmk what is says, minus the first two lines, which is probably your IP address. So lines '3' and on.

To copy/paste from the cmd window, you right click and choose 'mark'. and then highlight it and right click again and it should be copied. Then just paste it here or wherever.

You can PM as well if you want.

Thanks!
-G

Your koni insert should come with the instructions.
I didn't do it for my b14, however I did do it on a corolla.
It was pretty straight forward.
1) you will have to drill a hole in the bottom of the strut to release the oil within

2) I sawzalled the top of the existing strut cartridge

3) insert koni insert and thread bolt through hole in bottom of strut

4) done

I take that back, I did a g/c csk installation a few years ago. Bascially it is the same, but I cut the stock spring perch off and welded a washer for the g/c to sit on.

[URL=""][/URL]

[URL=""][/URL]

It ain't rocket science. The only hard part was since I went w/ the maxima reds I had much options of spring rates and lengths.
If I remember correctly, i had 500 lb up front and 450 in the rear.

that's what i was thinkin. i can't be as hard as it seems.



i'll find out and pm u. thanks

if i did this right it says. sr20forum.com is not reconised as an internal or external command, operable program or batch file.