Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Feeler: Prebuilt CSK's

+ Reply To Thread
Posts: 91-100 of 106
2009-07-15 21:34:45
#91
Originally Posted by bluebomber
bump for interest ... it seems as though this died??


Sent you some pics of the Gs suspension when I did my brake lines and never heard back from you. I thought you died
2009-07-16 12:43:16
#92
Blair my man. I actually spoke with the owner of AMR the other day. We are working on some suspension things and we talked about the P-cars. We both agreed that an adjustable arm is out of the question. CKS's shouldnt be a problem but camber plates will probably be out of the question. I should be able to make mono pillow ball mounts though. This should sharpen and stiffen up the front steering.
2009-07-16 16:52:53
#93
Originally Posted by bluebomber
Blair my man. I actually spoke with the owner of AMR the other day. We are working on some suspension things and we talked about the P-cars. We both agreed that an adjustable arm is out of the question. CKS's shouldnt be a problem but camber plates will probably be out of the question. I should be able to make mono pillow ball mounts though. This should sharpen and stiffen up the front steering.


Very cool. Sounds like something I would be interested in! Too bad about the adjustable upper link. Any reason why you guys came to that conclusion?

I was joking by the way about what I said, just in case you werent sure. I figured you just got busy or something.
2009-07-16 20:13:13
#94
It would almost be impossible to make a two piece design that would slide together.
2009-07-17 13:54:30
#95
Few more pics of a completed B14 front setup with SpecV yellows, my tophats with rotational bearing, adapter and camber plates. Obviously the tophat would be sitting up against the adapter. These housings are setup for a conventional spring, we have an option of removing this lower perch and welding on a lower coilover sleeve perch.


2009-07-17 14:32:09
#96
question for you, can you weld on some sleeves onto some housing?

should look something like this to the left

2009-07-17 18:38:25
#97
Yes we can do that as well.
2009-07-18 02:17:05
#98
COOL!

If i supply the housing and measurements, can you get the sleeves?
2009-07-23 19:49:28
#99
yup
2009-11-12 05:52:53
#100
Hey I want Koni Yellow SpecV externally adjustable strut inserts on my B13.

I have been reading through suspension threads on sr20forum and sr20-forum and I'm coming a little short of a complete understanding of what I need to do to make this happen.

struts:
I need B15 SpecV Koni Yellows


FRONT strut housings:
I think that I need front OEM B13 strut housings (shortened of course) for the front


REAR strut housings:
I hear I need rear OEM B14 strut housings for the rear.
I have also heard that certain Maxima rear strut housings also work, but I am not sure which ones.
1989-1994 Maxima? 1995-1999 Maxima?

Thanks in Advance!

-Matt
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top