Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: bumpsteer kit

+ Reply To Thread
Posts: 1-10 of 166
2010-04-13 07:01:58
#1
bumpsteer kit
100% bolt in
these are bolt-in kits, that DO NOT require any machine work

these will include a drop-in stud that allows you to run the tierod over OR under the steering knuckle, rodends, jam nuts, tierod to rodend coupler and adjusting spacers.

here is the initial offering

http://www.sr20forum.com/1757389-post27.html


i am using a revised stud with no thread except for the ends (NAS style)



kit includes
2 custom studs
2 spacer kits
2 couplers
2 rodends
hardware

$150 shipped

in production now - should be available june 1st

IMPORTANT NOTE

these come very close to binding on a stock suspension!!!

how well these would suit your application i cannot predict

buyers assume all resposibility for fit, function, set-up and safety of this product.

$150 shipped

e-mail orders to : [email]octotat@aol.com[/email]

when ordering include your name, address, ship address, telephone #, sr20forum user id, car year and model.

payment can be made by:

paypal id = [email]octotat@aol.com[/email]

money order =
chuck olcott
bolt in bars
5117 n 35th dr
phoenix az 85019

LEGAL STUFF:
Warranty, disclaimer of all warranties, release, assumption of risk, and purchase agreement

This is a contract and your agreement to which you have consented and entered into by your purchase and/or use of any products manufactured and/or sold by Bolt In Bars. If you do not wish to be bound by these terms, do not use or purchase any products manufactured and/or sold by Bolt In Bars.

Bolt In Bars are not responsible for any direct, incidental, and/or consequential damages arising from or in any way related to the use or installation of any products manufactured and/or sold by Bolt In Bars. The purchase and/or use of any part manufactured and/or sold by Bolt In Bars hereby releases Bolt In Bars from any and all liability for the use of these parts in any fashion.

The use of any performance product or vehicle is potentially dangerous. Racing anything is dangerous. Serious bodily injury and/or death can result from the operation of performance vehicles in any environment, especially when racing. The purchaser and/or user of any product manufactured and/or sold by Bolt In Bars understands this and assumes the risk of injury or death and accepts full responsibility for all damages and injuries incurred through the use of these products, from participating in any competitive events, and/or from operating a performance vehicle in any other way.

There is no warranty of any kind (express or implied, fitness of usage, for a particular purpose and/or merchantability) made for any product manufactured and/or sold by Bolt In Bars. All products are sold “AS-IS” and “WITH ALL FAULTS” basis. Buyer and/or user agree that he or she has had the opportunity to fully examine these products before use and/or installation. Bolt In Bars are not responsible for the manner and method of the installation of these parts. That responsibility lies solely with the user and/or buyer of these parts. All parts manufactured and/or sold by Bolt In Bars are intended solely for off road use and not for use on the public roads. The use of these products on public roads is illegal and the installation of these parts on a vehicle may make that vehicle illegal for use on public roads. The best-designed and manufactured products still need maintenance. A performance vehicle vibrates tremendously and literally shakes itself apart every time it is operated. You must recheck the tightness of all fasteners on your vehicle prior to operating it each time to insure that parts do not become loose and create a hazard. This is the sole responsibility of the buyer and/or user of these parts.

If your vehicle is being operated in an organized event, the buyer and/or user of these parts is solely responsible for complying with all safety and/or technical requirements of that sanctioning body. These rules must be complied with. Buyer and/or user warrant that he or she is in compliance with all such rules and requirements and further acknowledge that these rules many not constitute the appropriate standard for safety practices and requirements, rather simply the minimum required by that particular organization.

Only you make the decision to purchase and/or use these parts and decided how to install and maintain them. Only you make the choice to operate a performance vehicle or to race it. If you think our products are unsafe, do not buy them. By purchasing and/or using these parts, you agree to be bound by all of the terms recited above.



stay tuned...
-chuck
2010-04-13 11:22:39
#2
Can i get just the bolt? The ones i have are threaded all the way which allows for some slop.
2010-04-14 06:59:36
#3
Any pics of this installed?
2010-04-14 10:28:58
#4
Interested, but I don't know if I can wait that long.
2010-04-14 23:29:36
#5
woot woot! I'm in.
2010-04-14 23:59:58
#6
yeerrpp this would be nice.. Exactly what I need
2010-04-15 12:24:39
#7
Add me to the list! When do you want payment?
2010-04-15 13:38:02
#8
^^x2
2010-04-24 03:31:25
#9
sounds good... will these fit the manual rack too?
2010-04-24 04:18:39
#10
I got a set of these from him back in the day. Love them. I will try to get some pics tomorrow.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top